# File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. # Note: to add font paths to the Mandrake 8 X system, # edit /etc/X11/fs/config FontPath "unix/:-1" # FontPath "/usr/X11R6/lib/X11/fonts/misc" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" # These are specified in /usr/X11R6/lib/X11/XftConfig FontPath "/usr/X11R6/lib/X11/fonts/truetype" # These are specified in /usr/X11R6/lib/X11/XftConfig FontPath "/usr/X11R6/lib/X11/fonts/Type1" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/misc" # FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" # Fontpath "/usr/X11R6/lib/X11/fonts/Speedo" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "200 18" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" # Option "Protocol" "PS/2" Option "Protocol" "IMPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection Section "Module" # This loads the DBE extension module. Load "dbe" # Load the glx module. Load "glx" # Do NOT load the following modules # Load "GLcore" # Load "dri" Load "extmod" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" #Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # Load "speedo" EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor0" VendorName "Dell" ModelName "i8000 SXGA Display" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 28-120 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-110 # No modelines necessary - NVIDIA driver seems to work out it's own modelines # DisplaySize 305 230 EndSection Section "Monitor" Identifier "NEC Cromaclear" VendorName "NEC" ModelName "Cromaclear" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 28-120 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-110 # No modelines necessary - NVIDIA driver seems to work out it's own modelines # DisplaySize 360 270 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "NV AGP" VendorName "nvidia" BoardName "GeForce2 Go" Driver "nvidia" # update this with the PCI id of your card. Consult the output # of the 'lspci' command. BusID "PCI:1:0:0" # # NVIDIA-specific option settings you may want to fiddle with # # Cursor Shadow Settings (shadow is off by default) # CursorShadow "1" # CursorShadowAlpha "64" # CursorShadowXOffset "4" # CursorShadowYOffset "2" # # Hardware cursor (default is ON) # Option "HWCursor" "1" # # Software cursor (default OFF) # Option "SWCursor "0" # # Ignoring EDID (Extended Display Identification Data) - default is OFF # Option "IgnoreEDID" "1" # # 2D Acceleration Feature (default is acceleration ON). Setting to OFF fixes a VMWARE guest full-screen # rendering bug, but really slows the display down. # Option "NoAccel" "0" # # Logo splash screen at X server startup (default off) # Option "NoLogo" "on" # # Experimental hardware acceleration of the RENDER extension (default is ON) # Option "NoRenderAccel" "1" # # Option "ShadowFB" "1" # # AGP module to use to provide AGP support (default is 3 - try AGPART, then NVIDIA AGP) # Option "NvAGP" "3" # # Where to get HorizSync and VertRefresh ranges from (Not sure what the default is) # Option "UseEdidFreqs" "1" EndSection Section "Device" Identifier "NV AGP TwinView" VendorName "nvidia" Driver "nvidia" # update this with the PCI id of your card. Consult the output # of the 'lspci' command. BusID "PCI:1:0:0" # sample twinview setup Option "TwinView" "1" # be sure to replace the HorizSync and VertRefresh with correct values # for your monitor! Option "SecondMonitorHorizSync" "31-82" Option "SecondMonitorVertRefresh" "55-120" Option "TwinViewOrientation" "LeftOf" Option "MetaModes" "1400x1050,1400x1050; 1280x1024,1280x1024; 1024x768,1024x768" Option "ConnectedMonitor" "crt,crt" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "NV AGP" Monitor "Monitor0" # You can use a depth of 24 if you like - just change the display subsection depth setting also DefaultColorDepth 16 Subsection "Display" Depth 16 Modes "1400x1050" "1280x1024" "1024x768" "800x600" # Modes "1400x1050" ViewPort 0 0 EndSubsection EndSection # # screen section for an nvidia AGP TwinView card # (look at the appropriate Device section) # Section "Screen" Identifier "screen2" Device "NV AGP TwinView" Monitor "NEC Cromaclear" DefaultColorDepth 24 Subsection "Display" Depth 16 Modes "1400x1050" "1280x1024" "1024x768" "800x600" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" # Screen "screen2" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection